Designed for flatter than vintage radius fretboards. The 16" Brass Knuckle works with straight 16" radius and " 10 to 14" Compound Radius " fretboards.

Relic'd / Aged - The Thorn Brass Knuckle is a 1-pc. compensated saddle for T-style 3-saddle bridges, designed 19 years ago by Ron Thorn - the first Principal Master Builder at the Fender Custom Shop.

Increased sustain, accurate intonation, and solid coupling between strings and bridge plate.
The advantage is all 6 of the strings' energy is transferred through just 2 points of contact between the Brass Knuckle and the bridge plate, instead of 6 found on a traditional 3-saddle arrangement.

In addition, the Brass Knuckle prevents lateral saddle movement which plagues traditional 3-saddle arrangements, often resulting in uneven string spacing, high e-string flopping off the side of the fretboard, and strings hanging up on height-adjustment screws causing buzzing and horrible sustain.

Works with tradition String-thru or Top-load bridges with most non-wound G-string gauge string sets (9-42, 10-46, 11-49 etc.)

Designed for flatter than vintage radius fretboards. The 16" Brass Knuckle works with straight 16" radius and " 10 to 14" Compound Radius " fretboards.

This listing is for the AGED 16" radius Thorn Brass Saddle for right handed guitars and mounting hardware only (Intonation screws and height adjustment set screws included, use 2 of your 3 existing springs). The bridge plate, pickup, springs and guitar shown in the photos is not included. This is for the RELIC'd / AGED version of the Brass Knuckle saddle. See other listing for NOS / NEW polished version available, too.

For 7-1/4" or 9-1/2" vintage radius fretboards, see other listings for the 9-1/2" Brass Knuckle.

For 12" or " 7-1/4" to 9-1/2" Compound Radius" fretboards, see other listings for the 12" Brass Knuckle.

This product is not affiliated with Fender / FMIC.

Thanks for looking!

Brass Knuckle 16" Relic

Brass Knuckle 16" Relic